cppcheckmcrun/mxrun simulation launch tool: (@willend)
--scan_split. Contribution from @Lomholy.cppcheck can be used to perform static code analysis on the generated code, use -C/--c-lint?NCrystal config strings. Contribution from @tkittel.mcplot/mxplot simulation plot tools: (@willend)
kill -USR2 or Progress_bar, and plots should work on an unfinished simulation.mcplot-matlab/mxplot-matlab tool is back. You need to manually install either Matlab or Octave to make use of thismcdisplay/mxdisplay instrument visualisation tools: (@willend)
conda-based installations, the mcdisplay-cad/mxdisplay-cad tool includes the cadquery dependency. On completion of building the model, the OS is asked to handle the resulting CAD model.mcdisplay-matlab/mxdisplay-matlab tool is back. You need to manually install either Matlab or Octave to make use of thismcdisplay-webgl-classic/mxdisplay-webgl-classic is used in such scenariosmcdisplay-webgl/mxdisplay-webgl based on THREE.js, react and other javascript requires a slightly time-consuming installation process on 1st launch. The user now gets an info box about this.mcdisplay-mantid IDF generator tool received a bug fix for OFF geometry detectors.mcdoc/mxdoc documentation tool: (@willend)
mctest/mxtest test tool: (@willend)
Fluorescence components have a new flag to enhance statistics/signal from low concentration materials. Work by @farhi.Union subsystem now handles 'surface physics' with the introduction of a system of refraction/reflection processes on geometry surfaces. Work by @mads-bertelsen.Union subsystem now has a functional 3D-mesh system (Union_mesh) that supports CAD style geometries. (Ascii/binary STL files and OFF files are supported. - For now only those with triangular meshing.) Work by @Lomholy.Union subsystem have been tested / improved / revised. Contributions by @tkittel and @willend in close collaboration with @mads-bertelsen.ISIS_LET by Ross Stewart and Rob Bewley, serves as test-instrument for Commodus_I3 (ISIS source model - corresponds to ViewModISIS with a different parameter interface)Multilayer_sample from Rob Dalgliesh was updated with nrepeats which allows to repeat an SLD material stack. ISIS_CRISP was updated to include this feature.TOF_PSDmonitor_toQ is a new component with built-in data reduction from Rob Dalgliesh. Uses ToF to calculate Q. Test_TOF_PSDmonitor_toQ is a basic instrument to showcase the component.conda platform which uses the
MSVC compiler is now fully functional
for all McStas code and a good part of the McXtrace code. As part of
this process a new header-file mccode-complex-lib.h
should be used by all code requiring complex numbers. (Implements
functions for e.g. +-*/ operations across platforms -
MSVC does not self implement these operations...) @willendFor all release details, please refer to the github release page for version 3.6.1
Seasons greetings from all of McStas/McXtrace - and hope you will enjoy this new release!
Peter Willendrup
INHERIT keyword in the component grammar: Allows to mix and match component sections from multiple components to achieve new functionality.
INHERIT)Full Changelog: https://github.com/mccode-dev/McCode/compare/v3.5.27...v3.5.32
Dear all,
McStas and McXtrace release 3.5.27 is now available.
McXtrace installation instructions are found on GitHub .
mcrun/mxrun have a new -y
switch which runs a given instrument using its default parameters.
mcplot/mxplot should now deal better with
negative / very small numbers in 'log' mode plotting.
mcgui/mxgui improved tooltips on the run dialogue.
rootmccode works with newer versions of ROOT
|P|>1.
We are now in the air with new server hardware.
Among other things this means that component mxdoc pages are back online - by popular demand!
We are in the process of upgrading the webserver for McStas, McXtrace and other sites. Please bear with us if you experience service interruptions. :-)
Dear all,
McStas and McXtrace release 3.5.24 is now available - McXtrace installation
instructons on GitHub .
mcgui/mxgui Let configuration dialogue spawn your EDITOR to edit your local mccode_config.json
by @willend in https://github.com/mccode-dev/McCode/pull/1838 (available also by --edit-user-config from mcrun/mxrun)mcrun/mxrun: New switch --cogen to allow on-demand switch to non-standard code generator.
See also interoperability with mccode-antlr below
by @willend in https://github.com/mccode-dev/McCode/pull/1851mcrun/mxrun Solution for picking up code generator from PATH if not found where expected
by @willend in https://github.com/mccode-dev/McCode/pull/1840mcdisplay/mxdisplay instrument line parsing
by @g5t in https://github.com/mccode-dev/McCode/pull/1834mcdisplay/mxdisplay in Windows
from @LelandWH https://github.com/mccode-dev/McCode/issues/1853Vertical_bender: Add max iteration criterion for while loop (default 1000).
by @willend in https://github.com/mccode-dev/McCode/pull/1815NCrystal_sample: Remove possible out-of-bounds memory access
by @g5t in https://github.com/mccode-dev/McCode/pull/1821Elliptic_guide_gravity and Pol_mirror: Minor comp revisions, suppresses compilation warnings from clang
by @willend in https://github.com/mccode-dev/McCode/pull/1826SNS_ARCS.instr edits
by @willend in https://github.com/mccode-dev/McCode/pull/1838ISIS_IMAT.instr DEPENDENCY " @NEXUSFLAGS@ " added
by @willend in https://github.com/mccode-dev/McCode/pull/1839Union_master Adjustment of default parameter
by @willend in https://github.com/mccode-dev/McCode/pull/1840Union-related fixes and imports from DMSC school
by @willend in https://github.com/mccode-dev/McCode/pull/1841Elliptical_guide_gravity did not work in GROUPS as it always SCATTERS
by @mads-bertelsen in https://github.com/mccode-dev/McCode/pull/1843Monitor_nD on GPU: Adjustments for coherence between CPU and GPU particle lists
by @willend in https://github.com/mccode-dev/McCode/pull/1816cl.exe: Remove variable length array allocations for issue #1817
by @g5t in https://github.com/mccode-dev/McCode/pull/1819 and
https://github.com/mccode-dev/McCode/issues/1818 by @willend in https://github.com/mccode-dev/McCode/pull/1822mccode-antlrmccode-antlr is an alternative code-generator for McStas and McXtrace - a new development by @g5t and based on ANTLR instead of lex/yacc. The new tool is mainly written in python and thus has a lower barrier for changes in language syntax and code generation. The tool implementations mcstas-antlr and mcxtrace-antlr are thus a candidate implementations to potentially replace the classic mcstas and mcxtrace code generators in the future. Current status is thatmcstas-antlr is fully feature complete wrt. mcstas for CPU simulations and close to complete for GPU simulationsmcxtrace-antlr but basic functionality is in placemccode-antlr from conda-forge or via pipmcstas-antlr by --cogen=mcstas-antlr option in mcrunMCCOGEN field of mccode_config.json using the new Save/Edit configuration in mcgui-I${MCSTAS} to prefer ingredients fromyour local library)mcrun-antlr/mxrun-antlr tools provided directly by mccode-antlr.exeinstaller from mccode.org:
Please place the MCPL-related .bat files from the extras folder in e.g. c:\mcstas-3.5.24\bin to enable MCPL
(May require giving your user 'full access' permissions to the bin folder)Full Changelog: https://github.com/mccode-dev/McCode/compare/v3.5.16...v3.5.24